Frameless Shower Doors in Fredericksburg, VA
Custom frameless and semi-frameless shower enclosures for homes throughout Northern Virginia. Professionally measured, flawlessly installed.
Your Bathroom, Finally Done Right.
A frameless glass shower transforms a dated bathroom into something that looks custom and feels permanent. But the difference between a good shower and a great one isn't just the glass. It is the installation. We walk you through every option, from frameless vs. semi-frameless to clear vs. low-iron glass, and hardware choices. We are your calm guide through the process. No pressure, no jargon.
Frameless vs. Semi-Frameless
Frameless Shower Enclosures: The gold standard for modern bathrooms. Heavy glass (typically 3/8" or 1/2") mounted with minimal hardware. It creates an open, airy feel and is easier to clean because there are no metal tracks to trap water and soap scum.
Semi-Frameless Shower Doors: A beautiful, budget-friendly alternative. These use slightly thinner glass with a metal frame around the perimeter of the enclosure, but the door itself remains frameless.
The Stafford Glass Standard
- ✦
Perfect Measurements: A frameless shower must be measured perfectly to account for walls that are out of plumb. We measure down to the sixteenth of an inch.
- ✦
Premium Hardware: We use high-quality hinges, clips, and handles that won't sag or tarnish over time.
- ✦
Clean Installation: No wavy lines. No sloppy silicone. Just a finished result you'll want to show off.
Ready to upgrade your shower?
Call us today for a free estimate in Fredericksburg, Stafford, or anywhere in Northern Virginia.
(540) 361-6907Call NowFrameless Shower Door Questions, Answered
Everything you want to know before you commit. Still have a question? Call or text us at (540) 361-6907.
Frameless shower door pricing in Virginia typically ranges from $900 to $2,500 or more depending on the size of the enclosure, the glass thickness, the hardware finish, and whether you choose standard clear glass or upgraded low-iron glass. The best way to get an accurate number for your specific bathroom is a free in-home estimate. Call or text us at (540) 361-6907.
A frameless shower door uses no metal framing around the glass panels, giving you a clean, open look that lets your tile and fixtures take center stage. A semi-frameless door uses minimal framing, usually just around the outer edges, which reduces cost while still looking sharp. We will walk you through both options and help you choose what fits your space and your budget.
The most common choices are standard clear glass and low-iron glass. Standard clear glass has a slight green tint at the edges. Low-iron glass is optically clearer and gives you a more premium, true-clear look, which makes it especially popular in high-end bathrooms. Both are available in 3/8 inch and 1/2 inch thickness. We can also add protective coatings to make daily cleaning easier.
Most frameless shower door installations take two to four hours from start to finish. We measure your space in advance, fabricate the glass to spec, and install on a scheduled date. We clean up completely before we leave. You can typically use the shower again the same day once the silicone has had time to cure, usually 24 hours.
Not much. Make sure the tile, walls, and floor around the shower opening are fully finished before we arrive. Glass is measured and installed after tile work is complete. If you are in the middle of a bathroom renovation, we can coordinate with your contractor to time our visit correctly.
A daily squeegee after showering is the single most effective habit. For weekly cleaning, a solution of equal parts white vinegar and water works well on glass. Avoid abrasive cleaners or scrubbing pads that can scratch the surface. If we applied a protective coating during installation, we will give you specific care instructions at that time.
